Archive for the ‘car spare part’ Category

Forklift Sparepart : General knowledge part forklift attachments

forkliftpartsA lift truck or powered industrial trucks used in the material handling industry to lift and transport loads and material from one location to another. Engine-powered engines have given an entirely new dimension to warehousing and manufacturing company. Because they have tied the working mechanism of the material handling industry, they are considered an essential part of the engine in the type of setup.

A lift truck is powered machinery which is used in the material handling industry to lift and transport loads and material from one location to another. The truck owners should therefore regularly maintain and keep their lift trucks in the mint condition. Some of the forklift parts tend to wear out with time as they are subjected to heavy wear and tear in the material industry. If you wish to utilize the lift trucks to their fullest potential, you have to replace the worn out forklift parts from time to time. Each of the forklift truck parts are specifically designed to perform a particular task and can thus be recognized by their purposes. In addition to replacing the forklift truck parts, you can also utilize forklift extensions in order to enhance the functioning of your lift trucks. Given below are some of the forklift attachments:

Side shifter: Side shifters enable easier load placement without changing the lift trucks’ position. It is hydraulic forklift attachment which enables the truck operators to move the backrest and the forklift forks laterally.

Forklift fork Positioner: Most of the lift trucks operators have to manually adjust forklift forks according to the size of the loads. This forklift fork positioner which is a hydraulic attachment helps in the movement of the forklift forks either separately or simultaneously.
Pole Attachments: These are long metal poles which are used instead of forklift forks to lift carpet rolls.

Telescopic forklift forks: These are hydraulic attachments, which enables loading as well as unloading of vehicles from single side. These forklift forks enables handling of two pallets of different sizes at a given point in time. They are thus beneficial for handling of the pallets in ‘Double deep racking’.
Forklift carton clamp attachments: These are hydraulic attachments that allow carton handling of very high volume. It has arm pads with rubber linings that are four way reversible. It enables the operators to pick up a load by applying uniform clamping force. It provides backrest to the loads in order to avoid any damages to the loads.
Slip sheet attachment: Slip sheet forklift is a hydraulic transport and storing systems that are without pallets. It moves ahead and clamps on to the slip sheet in order to draw it on to a thin and wide metal forklift forks for transport. These sheets can be applied very well at the time of intra-corporate deliveries as well as overseas shipments.
Man Basket: This is a lift platform which is meant for hoisting the workers. This man basket which slides on to the forklift forks has railings that prevent the falling off the workers. They are also equipped with brackets that are used for attaching to the safety harness. In order to attach man basket to the forklift carriage, a strap or forklift chain is used.

 

 

Five Common Transmission Problems Of Car

car-transmission-gearsYour vehicle’s transmission system is one of the most important parts of your vehicle. This part of your vehicle that directs power from the engine to the driveshaft change impulse wheels on your vehicle. Transmission problem can cause major damage to your vehicle and make costly repairs.

Knowing some common of car transmission problems will allow you to accurately diagnose and determine the type of repair or service may be required. Solutions can range from add transmission fluid to take your vehicle in for repair professional.

Here is a list of some common types of transmission problems:

1. The low level or leakage of fluid.
Some car transmission problems are most commonly caused by low levels of transmission fluid. Low fluid levels normally leak. Fluid leak may be caused by a rupture in the fluid lines, the destruction of the transmission pan gasket, or the safety bolt has been damaged, and the seal on the transmission pan. Skid gear and the slow shift is a symptom of the problem caused by the transmission of the transmission fluid level is low. Be sure to regularly check your transmission fluid regularly and add fluid if necessary. If problems persist, may want your vehicle to be evaluated by a specialist professional transmission.

2. Clutch is worn out.
Located inside the torque converter clutch can sometimes become jammed. When the clutch failed, the amount of transmission fluid in the torque converter can not be counted correctly. One symptom of the clutch problem is that the teeth will become sluggish when shifting. Another is violent shaking underneath the vehicle which can cause your engine to overheat. If your vehicle is experiencing clutch problems for serviced immediately.

3. Solenoid
Solenoid is part of your transmission system that controls the flow rate of fluid transmission. A faulty solenoid can cause transmission problems for regulatory use of improper fluid. If you do not change gear transmission smooth and fluid levels are normal, you may run into problems with your solenoid. solenoid is the next thing to check if the vehicle you are displaying symptoms of the transmission fluid is low but normal levels of fluid volume.

4. Torque Converter
Problems with the torque converter can often result in transmission damage or failure. One common problem associated with the transmission torque converter needle bearings are worn or damaged. separate needle bearing stator, impellor, turbine and converter housing. If you hear a strange grinding noises coming from the transmission when the vehicle is in the drive, you probably have a problem with needle bearings in the torque converter. This can cause serious transmission problems and had to be taken to a professional-quality transmission for service and repair.

5. Transmission Sensor Problems
Sometimes transmission problems not caused by mechanical failure. Many newer vehicles use computer technology to control the transmission system. Transmission problem can be caused by sensors or software failure. Specialist local transmission you have diagnostic tools to determine whether your transmission problems come from software or sensor damage.

There are several car vehicle transmission problems that you may experience. Routine maintenance is the key to preventing most of the transmission problems. You should check your transmission fluid as often as you check your oil. Remember, transmission problems do not go away – they only worse.

There are many auto repair shops that provide local transmission repair and service experts. They have the experience and equipment to accurately diagnose vehicle transmission problems you may have. If you already begin to see that your vehicle does not shift or stay in gear as it should, or if you make the transmission of noise, shaking or cause your engine to overheat then you need to take action immediate attention.

The common trouble of car wheel bearings

Knowing the signs of the cause of wheel bearing hub will damage their grinding noise when driving.

check wheel bearingsFriction is generated traction any moving mechanical parts of the vehicle. Various mechanisms designed to combat friction, including lubrication and the use of continuous friction reducing vehicle components such as wheel bearings.

A bearing is placed on the axle of the wheel hub car, to reduce metal-to-metal surface contact friction and let the wheels spin freely. This is an important component of the car’s suspension. Although the bearings are lubricated, they eventually wear out over time. Wearing out can be accelerated by dirt and other contaminants into the assembly.

Although the wheel bearings have a seal cover, the water still get into the bearings and can cause rust, as well as causing contaminate the lubricating oil. The wheel also handle the weight of the vehicle along with friction tires. Although, bearing usually built to last for more than 150,000 miles, friction does not take its toll eventually and wears them out. The problem with the bearings are mostly due to wear or seal the leak.

Knowing the symptoms.
Diagnose car problems requires an eye for small detail and an ear for sound abnormal. You do not need to be a car to see the symptoms of car trouble. To diagnose the problem, you should know the symptoms that indicate bad bearing. Here is a list of the main symptoms.

Grinding noise.
Friction always produces noise and heat while slowly pressing down on the move. Symptoms of worn wheel bearings are noise, vibration. or roar. which can be heard around the wheels when moving. The volume and intensity of this noise is generally proportional to the speed of the vehicle and does not change much while slowing down.

During the turn, the noise can get louder or even disappear. This is a signal that you need to pay attention to the condition of bearings and get them replaced as soon as possible. If the problem is ignored long, they may rupture suddenly and the wheels may be dislodged, causing a major accident! In fact, it could happen only in very extreme cases the wheel bearing wear, it is important that you pay attention to it as soon as possible.

Rotation of the wheel.
Another important symptom is the distance play or looseness of the wheel. As the pads wear out, they lose their shape and let the wheel hub and spindle to go loose. This misalignment hub, eventually causing the wheels to go loose. To check rotation of the wheel, just raise your vehicle on a jack and pull or push the tire. Excessive rotation of the wheel rocking indicates that the pads have worn to a great extent and need immediate replacement.

The Most Reliable Land Rover Spare Shop

Land Rover may be one of the best auto manufacture giant in the industry, with a huge selection of car models with sleek and sophisticated design that is complemented with various high technology systems and features, Land Rover has undoubtedly made its mark in the automotive world. The car is not only attractive, it is also durable. It’s no wonder that many of loyal Land Rover enthusiasts still stick with their older Rovers up to this date. While its durability and quality are not to be questioned, one question still looms: what would happen if they needed a part or an accessory for their older generation Rover? Are these Land Rover spares and accessories for older Rover generations that are being sold online even genuine?

The answer to that question is depends – which is why it is imperative for you to purchase spares and accessories from a trusted and reliable part and accessory shop. Especially when you are purchasing it online – I was someone who tried my best to avoid online purchase for this type of thing, the fact that I cannot see the product and inspect whether or not it is genuine used to put me off. Fortunately, I stumbled upon UKAR AUTO on my last quest for genuine part, and I can confirm that it is indeed one of the most reliable online sparepart shops.

Not only does UKAR AUTO offer a wide range of high quality Rover spares and accessories that are guaranteed to be genuine and of high quality, it also offers every single spare and accessory imaginable from every single model of Land Rover ever released to the market and they also ship worldwide! Now you no longer have to worry whether or not you will be able to find the sparepart, accessory or even repair kit that is best suitable to your car in your hometown, as UKAR AUTO will help you get out of that rut immediately. You won’t regret it.

Considering Pontiac 2002 Fuel Consumption

I’m having problems with my car 2002 Pontiac Grand AM GT. It was very strange idling and has lope 500 RPM makes the car sound like it was struggling to stay alive and running. My gas mileage is around 12 MPG around 50% of EPA estimated 25 mpg when it was new. Checking the code I see that O2 (air) sensor to code, so I decided to change it. It turns out there are two sensors that you can change, upstream and downstream. One usually worsen and lead to skyrocketing fuel consumption is upstream, fortunately less than 2. $ 45.00 in Autoshope.

sensor-oxy-pontiacSo I buy the sensor and replace the sensor soon return, and ultimately did not succeed. With youtube guide, not a single video or adequate description. So for anyone curious here is a walkthrough.
Some items to keep in mind, an O2 sensor requires a special socket to attach / detach, if you do not have one (you may not) Autoshope will let you rent part of the deposit, this can be done easily in the parking lot so no worries. Viewed 02 sensors will be in the back of the machine, the closest to the vehicle cabin. Opening a new sensor you to get a feel for how it should look. sensors can be found just below the rear set of spark plug wires. The best way is to let go of it so you have plenty of room to work. Think about the order in which they are installed, believe me if you do not put them back in the right order you’ll know about it before you install it.

Next how to remove the sensor from the electrical connection, it is very easy, I just slid right off. You may need a screwdriver to achieve this though. Autozshope have a special tool to remove the oxygen sensor, but unless you are exremely strong you may not be able to break loose O2 sensor. They must have a breaker bar and a special socket that will allow you to use leverage to loosen the sensor. After it is removed, note the carbon that has been built on the sensor.

What happens, the sensor does not tell the onboard computer the correct oxygen levels, which then causes the computer to inject more fuel for compression. So ride your MPG, spark plug fouling, kill the engine peformance.

Steps to install a new sensor is simple. The first screw in the sensor with your fingers until fingertight. Then use a breaker bar and tighten down sensor. Connecting the sensor to an electric power connector and replace the spark plugs in the exact order that they were in the beginning.
Start your engine must see that the cars start faster, idles a lot more subtle and does not emit excessive exhaust / exhaust odor. The true test is to see what you are up to the mileage. Go to full fill your vehicle, drive around for a few days. Trust me when I say that if gas mileage is as bad as factory smoke, if you replace your O2 sensor to work, you’ll know it’s really fast. Currently I am almost to the EPA estimated MPG to Pontiac Grand 2002 to 25 MPG, my average is 22 MPG. Fully save 50% increase just by changing the parts for $ 45.

Electro Parking Sensor Technology for Cars

car-features-parking-sensorIncreasing traffic and lack of parking space has lead to serious problems for most of the vehicle drivers, especially the novices. Not just novices, it is even difficult for an experienced driver to drive properly and save his car from scrapes, scratches and expensive collisions. Under such situation, the urge for an effective and optimum solution emerges that can act as preventive solution for all such problems. But is there any such solution or remedy available?

An effective way to safeguard vehicle from most of the scrapes, bumps and expensive collisions is by making use of technology known as electromagnetic parking sensor technology. It is only possible with the help of this extraordinary technology that one can drive the vehicle with full confidence and can save good amount of money which otherwise was required to be spent on repair or maintenance.

Now-a-days more and more people are relying on car parking sensor technology. So if you also love your favorite car and wanted to give it the best protection.

The electromagnetic parking sensor offered parking dynamics is in great demand right from its inception. Unlike ultrasonic parking sensors, the No Hole in bumper electromagnetic parking sensor is simply a unique as well as revolutionary front and rear electromagnetic parking and reverse sensor technology that helps in providing the best protection to the vehicle that too without destroying the original look of the vehicle.

So if you are looking for the best car parking sensor, then option you must avail without any hesitation. If you want to know more about sensor parking dynamics, then it is best to have a quick look on some of the most important features of parking dynamics. Some of the most important features of ParkingDynamics are as under:

1. Goodwill: The first and the most important feature of  that is known for its goodwill. Since its inception, it is known to offer only the quality products without any issues pertaining to quality.

2. Best quality products at unimaginable prices: The second most important feature is that it offers s quality products that too at very reasonable prices.